1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

OT Help Wiring a Ventriloquist Voice release

Discussion in 'Shooting Related Threads' started by todman2, Dec 4, 2010.

Thread Status:
Not open for further replies.
  1. todman2

    todman2 Member

    Joined:
    Jan 15, 2007
    Messages:
    286
    Location:
    Fort Myers, Florida
    I have a Ventriloquist Voice Release system that I am trying to use on the Long Range Counter System. I want to shoot skeet with it but the Long Range Counter has a 4 wire plug and the Ventriloquit has a 3 wire lead.

    I can get the Low bird and doubles to release but no high house.

    Has anyone used this setup and figured how to wire the plug into the counter correctly.

    Thanks
     
  2. Hill topper

    Hill topper Member

    Joined:
    Jan 29, 1998
    Messages:
    547
    The fella that made the unit used to post on this site.

    I had contacted him once to replace a microphone.

    Think his first name was Dennis.

    Perhaps someone else can help you.

    ed.
     
  3. chipking

    chipking TS Member

    Joined:
    Jan 29, 1998
    Messages:
    1,761
    Try this link it is the manual for the ventriliquest. Hope this will help.

    http://www.ventriloquistinc.com/Manual/Vman2006g2.pdf

    --- Chip King ---
     
  4. todman2

    todman2 Member

    Joined:
    Jan 15, 2007
    Messages:
    286
    Location:
    Fort Myers, Florida
    Thanks for the help from those who replied. Found the problem; had a wire that was labled in correctly. The guys at the gun club took apart a handset and found that the common wire in the plug was not wired as described in the instructions. Switched 2 wire around and works like a charm

    Thanks
     
Thread Status:
Not open for further replies.