1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Nylon Spacers - Stock

Discussion in 'Shooting Related Threads' started by dbart1948, Mar 25, 2011.

Thread Status:
Not open for further replies.
  1. dbart1948

    dbart1948 Member

    Joined:
    Jan 29, 1998
    Messages:
    94
    Question - I have a Browning Special Trap with an adjustable comb. Where can I purchase these thick nylon spacers that will maintain the height of the comb to prevent it from slipping?

    Thanks

    Dave
     
  2. Ted K.

    Ted K. Member

    Joined:
    Feb 8, 2009
    Messages:
    507
    Location:
    Tiburon, CA
    Any hardware store - they are just washers of differing thickness. There is someone on the internet that sells a collection of various colored spacers (washers) for $25. Replacement cost at your local hardware store would be about $3, unless you are particular about colors.

    Ted K.
     
  3. Mr. Lester

    Mr. Lester Member

    Joined:
    Jan 29, 1998
    Messages:
    132
    Graco have them for something like 5.00 per 100. Lester
     
  4. fssberson

    fssberson Active Member

    Joined:
    Jan 29, 1998
    Messages:
    2,375
    Try Dennis DeVault. He sells complete sets in color which helps match up the height. Excellent quality - worth the $$'s. Go to his web site to order. Call him as they have varying sizes to fit the posts.. no wobble. Fred
     
  5. likes-to-shoot

    likes-to-shoot Well-Known Member

    Joined:
    Oct 6, 2006
    Messages:
    6,085
    Location:
    Iowa
    Menards, Lowes and Home Depot come to mind plus local hardware stores.
     
  6. grunt

    grunt TS Supporters TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    5,918
    Location:
    Thousand Oaks Ca
    Phil Kiner also sells spacers..
     
  7. Barry C. Roach

    Barry C. Roach Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    9,209
    Location:
    Scottsdale, AZ
  8. Scott Morris

    Scott Morris TS Member

    Joined:
    Dec 26, 2009
    Messages:
    35
    I second Dennis DeVault's spacers. I shoot an XT my wife a BT & I have been really pleased with his comb spacers.
    Scott
     
  9. whiz white

    whiz white Strong Supporter of Trapshooting Banned

    Joined:
    Jan 29, 1998
    Messages:
    4,771
    Location:
    Rapid City SD
    Tell you what: You give me the height of a spacer for the front and the height for a spacer for the back (front should be a tad shorter than the back), and I'll run a them off on the lathe out of aluminum and send to you for nothing. Need hole ID as well.

    I have my Perazzi spacers set 1mm shorter in the front and 1mm taller in the rear. This really helps to avoid felt recoil. So, if I am running 8mm for the comb height, the front spacer will be 7mm and rear will be 9mm.

    E-mail me, as I don't usually get back to these threads often enough.

    Whiz
     
Thread Status:
Not open for further replies.