1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Noble Sport Primers ?

Discussion in 'Shooting Related Threads' started by George MT., Apr 22, 2013.

Thread Status:
Not open for further replies.
  1. George MT.

    George MT. Moderator Staff Member

    Jan 29, 1998
    Northwest MT.
    Has anyone had experience reloading with these primers?If so what type of hull and what type of primer are the comparable to such as Rem. or Fed. Ect.Thanks in advance for a reply George
  2. Unknown1

    Unknown1 Well-Known Member

    Nov 5, 2009
    I use them in Remington hulls (GC and STS) with American select and ClayDot powders. According to Alliant, Nobels can be used in place Winchester, CCI, Cheddite and Remington for 1 oz and 1 1/8 oz loads with these powders.

    They can also be used in place of Federals but will make a somewhat slower load with the same data.

    They are slightly larger in diameter than most other primers so fitting them in to a steel base hull may be a bit of a challenge the first reload depending on the press you use.

    They are the ONLY non-US primers that my Brownings don't punch holes in.

Thread Status:
Not open for further replies.