1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

New Hing Pin

Discussion in 'Uncategorized Threads' started by parrot man, Mar 12, 2008.

Thread Status:
Not open for further replies.
  1. parrot man

    parrot man TS Member

    Joined:
    Jan 29, 1998
    Messages:
    30
    Hi Guys,
    I asked this question before but didn't get mant responces.
    My Bt99+ needs a new hing pin. When the gun is put together you can wobble the fore end from side to side.

    Any ideas on who would fix this cheap,or is it even the hing pin? I would be willing to send it away but it has to be inexpensive. By the way somebody hear said it could also be the locking block I think.

    Any Help with this is Appreciated.....

    parrot man
     
  2. parrot man

    parrot man TS Member

    Joined:
    Jan 29, 1998
    Messages:
    30
    Hi Guys,
    I asked this question before but didn't get mant responces.
    My Bt99+ needs a new hing pin. When the gun is put together you can wobble the fore end from side to side.

    Any ideas on who would fix this cheap,or is it even the hing pin? I would be willing to send it away but it has to be inexpensive. By the way somebody hear said it could also be the locking block I think.

    Any Help with this is Appreciated.....

    parrot man
     
  3. N. J. BOB

    N. J. BOB Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,001
    parrot man

    Keep in mind you get what you pay for .....
     
  4. GunDr

    GunDr Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,913
    As I stated on your other post, you will need a new locking bolt or your current one rebuilt. It'll be over $100 who ever you choose.

    Doug
     
  5. Old Cowboy

    Old Cowboy Active Member

    Joined:
    Jan 29, 1998
    Messages:
    2,988
    If your gun locks up tight but the forearm is loose it's not the hinge pin.

    John C. Saubak
     
  6. Dr.Longshot

    Dr.Longshot Banned Banned

    Joined:
    Jan 29, 1998
    Messages:
    5,722
    Parrot man Give this guy a call Thurman Gobel at 419-675 3164 located here in Ohio. Explain to him the problem you are having.


    Gary Bryant
    Dr.longshot
     
  7. theodorescolt45

    theodorescolt45 TS Member

    Joined:
    Oct 12, 2007
    Messages:
    88
    I never heard of a < 'hing pin' > ?
    but, I had a citori in the mid 80's that became loose as a goose !
    barrels would wiggle and forend too, I bought it used and it was about
    6 years old ( young ! ) then. Called browning, sent it back, got back about 3 weeks later and it was tight as new ! Shot it a few more years and sold it
    to a fellow shooter and it was still tight !

    I would recommend you call Browning, they seem to stand behind their products

    Good Luck !

    get a K-Gun !
     
  8. chessney

    chessney TS Member

    Joined:
    Jan 29, 1998
    Messages:
    644
    What the hell is a Hing Pin...Ziggy
     
Thread Status:
Not open for further replies.