1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

need to know- bt99 question

Discussion in 'Shooting Related Threads' started by acss, Nov 8, 2009.

Thread Status:
Not open for further replies.
  1. acss

    acss Well-Known Member Supporting Vendor

    Joined:
    Feb 7, 2006
    Messages:
    5,988
    Location:
    rock port, mo
    i am sure its been discussed- but i need to know how to convert a BT99 from eject to extracting shells wally riebesell 660-744-4115
     
  2. hunter44

    hunter44 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,370
    Wally, go to ShotGunWorld.com forum, scroll down to the browning shotguns section, it will be the first sticky there........complete with pictures.
     
  3. luvtrapguns

    luvtrapguns Well-Known Member

    Joined:
    Jun 19, 2009
    Messages:
    1,901
    Location:
    FL
    Wally, It is quite easy. Firsr remove the stock from receiver. On the left side of the receiver you will find a thin rod that moves forward when the hammer falls. This rod moves forward through a hole in the receiver and projects it's tip so that it triggers the ejector. Simply remove the rod (it pulls straight out the rear) and store it away in case you ever want to go back to ejecter mode. Put stock back on and you are ready to go.

    Hope this helps, Marc
     
Thread Status:
Not open for further replies.