1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.

Need Information

Discussion in 'Shooting Related Threads' started by chuckie68, May 7, 2012.

Thread Status:
Not open for further replies.
  1. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,823
    Location:
    Royal Oak, Michigan
    I was presented with a Pacific Hydraulic 12 loading press, complete with pump. Does anyone know if there are parts available? Also manuals, or any other material pertaining to the beast?

    Chuck

    P.S. If you do please send me a PM
     
  2. RickN

    RickN Well-Known Member

    Joined:
    Sep 17, 2008
    Messages:
    2,237
    Location:
    Beautiful Louisburg Minnysoda
    Chuck, any chance you could post a few pictures? Lot's of us are curious about older progressive reloaders.
     
  3. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,823
    Location:
    Royal Oak, Michigan
    I'll try to post som pics tomorrow--having problems with my camera link up to my computer.

    Chuck
     
  4. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,823
    Location:
    Royal Oak, Michigan
    OK --- I made a mistake. The loader is a POWERMATIC. I will post some pictures and any other information I can find.

    Chuck
    chuckie68_2012_1301.jpg

    chuckie68_2012_13016.jpg

    chuckie68_2012_13017.jpg

    chuckie68_2012_13018.jpg

    chuckie68_2012_13019.jpg

    chuckie68_2012_130110.jpg
     
  5. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,823
    Location:
    Royal Oak, Michigan
  6. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,823
    Location:
    Royal Oak, Michigan
    ttt I'm trying to load pictures
     
  7. Calkidd

    Calkidd Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,323
    Location:
    Central Valley
    Chuck if you need help you can email them to me and I will post them.

    Bryan
     
  8. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,823
    Location:
    Royal Oak, Michigan
    TA DA!! I got them to load on one of my replies. So they are there for all you reloader fanaticds to see and direct me in the right direction to get it runnung again.

    Chuck
     
  9. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,823
    Location:
    Royal Oak, Michigan
    TA DA!! I got them to load on one of my replies. So they are there for all you reloader fanaticds to see and direct me in the right direction to get it runnung again.

    Chuck
     
  10. BigM-Perazzi

    BigM-Perazzi Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    7,882
    Location:
    HELL, MICHIGAN
    wow! Looks, um, dangerous!
     
  11. ohiomike

    ohiomike Member

    Joined:
    Jan 29, 1998
    Messages:
    144
    I can tell you from experience, you've got a heck of a piece of equipment right there.

    It will load great shells, and pretty fast too, but it can also crush fingertips, bend parts, and shoot the balls out of those carousel bearings with amazing force. Don't ask me how I know, just trust me.

    I think I may have an owners manual I would be happy to copy and send to you, but I may need a few days to dig it up and copy it. If not, I may be able to answer questions you may have. That looks a little newer than the one I have, but close enough, definitely the same basic loader.

    Whatever you do, don't let anyone talk you out of it before we communicate.

    I will try to message you soon.
     
  12. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,823
    Location:
    Royal Oak, Michigan
    Ohiomike, I can't thank you enough for your offer. If you send me your phone number in a PM, I will make it a point to call you within the next week. I am out of town at the moment but will return Friday.

    Chuck Stevens
     
  13. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,823
    Location:
    Royal Oak, Michigan
  14. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,823
    Location:
    Royal Oak, Michigan
  15. RickN

    RickN Well-Known Member

    Joined:
    Sep 17, 2008
    Messages:
    2,237
    Location:
    Beautiful Louisburg Minnysoda
    Info at the above.


    Thanks for the great pictures.
     
  16. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,823
    Location:
    Royal Oak, Michigan
    OK you guys, I just hit the MOTHER LODE!!! I went to the gun club tonight to shpoot a couple rounds for practice and Pete---he's the guy that gave me this press said to me "come with me". Well I didn't know what to expect. See, Pete is a past President of the club and I am running for Pres this year. Anyway back to the unexpected. I went with Pete to what we call "ground zero" that is where we do all the repairs on the Traps. Pete goes in the biulding and comes out with this big piece of wood with all this stuff on it, I couldn't tell what it was from a distance. Lo and Behold!!!! Pete presented me with all the conversion dies for this press. I now have all the parts to make it work I just need a little time to work on it!!! WHOOPEEE!!!

    Chuck
     
  17. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,823
    Location:
    Royal Oak, Michigan
  18. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,823
    Location:
    Royal Oak, Michigan
  19. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,823
    Location:
    Royal Oak, Michigan
  20. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,823
    Location:
    Royal Oak, Michigan
Thread Status:
Not open for further replies.