1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Need help with MEC Hustler

Discussion in 'Shooting Related Threads' started by Mr. D, Nov 3, 2009.

Thread Status:
Not open for further replies.
  1. Mr. D

    Mr. D Member

    Joined:
    Sep 18, 2009
    Messages:
    136
    Location:
    Laceys Spring AL
    Hi

    I came across a nice MEC Hustler H761R for a song that is missing the Hydraulic pump and hose. MEC wants $718 for a pump plus $40 for a hose so that is a non starter.

    Any other ideas for a hydraulic pump or what PSI/GPM I would need?

    Last option is to convert it to a manual or use it for parts down the road.

    Thanks
     
  2. Mr. D

    Mr. D Member

    Joined:
    Sep 18, 2009
    Messages:
    136
    Location:
    Laceys Spring AL
    TTT for another round. I was looking at the hyd cylinder tonight and it just doesn't seem like it would require a $780 pump to operate it.
     
  3. gun1357

    gun1357 Active Member

    Joined:
    Jun 30, 2006
    Messages:
    927
    You could put an Automate under it. All you have to do is cut a slot under where the piston attaches to the base plate and you are in business. That is what I did and it works great. Ron Renouf
     
  4. birddog1964

    birddog1964 TS Member

    Joined:
    May 3, 2009
    Messages:
    466
    the info for the pump is .50 gpm at 650psi as long as is a single stage pump> pumps one way not two.

    thanks
    Lee
     
  5. gun1357

    gun1357 Active Member

    Joined:
    Jun 30, 2006
    Messages:
    927
    Everyone has their personal favorites but my 9000 sits collecting dust while I use the Hustler. Ron
     
  6. Mr. D

    Mr. D Member

    Joined:
    Sep 18, 2009
    Messages:
    136
    Location:
    Laceys Spring AL
    I was looking at both the Automate and the Hyd pump in action on You Tube and they sure get the job done.
     
  7. Mr. D

    Mr. D Member

    Joined:
    Sep 18, 2009
    Messages:
    136
    Location:
    Laceys Spring AL
    Thanks Lee that was the info I was looking for.
     
  8. virg

    virg Member

    Joined:
    Jan 29, 1998
    Messages:
    131
    I have a grabber hydraulic with pump and hose I will sell for $400 plus actual shipping from Wi.. You could convert one of the presses to manual and get some of your money back. 608-475-0295 Virg
     
Thread Status:
Not open for further replies.
Search tags for this page

mec h761r

,

mec hustler model h761r