1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.

MX-8 barrel

Discussion in 'Shooting Related Threads' started by rooferbob, May 15, 2012.

Thread Status:
Not open for further replies.
  1. rooferbob

    rooferbob TS Member

    Joined:
    Jan 29, 1998
    Messages:
    1,461
    I am looking for a sporting clays barrel for my MX-8 with tubes in 29 1/2 or 30".
    PM if anyone has one.
    Thanks in advance




    Rooferbob
  2. g7777777

    g7777777 Active Member

    Joined:
    Jan 29, 1998
    Messages:
    9,206
    I have a type 4 with a P choke tube in the bottom barrel and the top barrel is fixed choke- but of course you can have someone install choke tubes there

    It looks like new frankly

    $1777

    Regards from Iowa

    Gene
  3. PeShooter

    PeShooter TS Member

    Joined:
    Jan 16, 2012
    Messages:
    20
    Location:
    Leawood, Kansas
    Rooferbob,
    I have a 29.5" O/U barrel off an MX2000 that was thin-wall choked by Briley and then the chokes fine tuned by Eyster for sporting clays at a range of 25-45 yards. The barrel is in the 119,5xx serial number range with a date stamp of "BP" indicating they are from 2001. The barrel is stamped 18.6 but I measure 0.738 inches in both barrels with my bore gauge. Let me know if you would be interested.
    Thanks,
    Phil
Thread Status:
Not open for further replies.