1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Multi scale charge bar for Mec Hydo

Discussion in 'Shooting Related Threads' started by 12Gagejon, May 12, 2010.

Thread Status:
Not open for further replies.
  1. 12Gagejon

    12Gagejon Member

    Joined:
    Jan 29, 1998
    Messages:
    304
    Has anyone had success loading with a Multi(adjustable charge bar on a Hustler 9000? Thank you Jon
     
  2. Shady Creek

    Shady Creek TS Member

    Joined:
    Feb 5, 2006
    Messages:
    573
    Works great on all of mine and not one problem......GOOD LUCK
     
  3. Bob_K

    Bob_K Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    1,478
    Location:
    Afton, Virginia
    I use them on my 9000H machines in 12, 20, and 28 ga. The cavity is a bit offset for use in the .410. For that I have reverted back to the standard bar, having reamed the shot cavity for an honest half oz, and reamed a series of powder bushings for the proper powder drops.
     
  4. Buster 25

    Buster 25 Member

    Joined:
    Apr 4, 2006
    Messages:
    315
    I have two, One for 1 oz loads, & 1 for 1.1/8oz load.
    They both work great.
    I use this set-up when I have a long loading session...1000, 1500 rounds at a setting.
     
  5. Neil Winston

    Neil Winston Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    7,845
    A solution in search of a problem.

    Neil
     
  6. TF

    TF Active Member

    Joined:
    Jan 29, 1998
    Messages:
    201
    Location:
    FL
    One benefit you may not think of until it happens to you is that if you have to change powder brands because of availability you never have to worry "do I have a bushing for that" you just adjust, weigh and load.


    Tom Frazer
     
  7. 12Gagejon

    12Gagejon Member

    Joined:
    Jan 29, 1998
    Messages:
    304
    Thank You all Jon
     
Thread Status:
Not open for further replies.