1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

more help needed

Discussion in 'Shooting Related Threads' started by gnusbaum, Jun 27, 2013.

  1. gnusbaum

    gnusbaum Member

    Joined:
    Feb 4, 2013
    Messages:
    117
    i have loaded about 4 flats and now my handle sticks alot is there a special grease or oil i should apply somewhere on therei have a mec 600 jr
     
  2. Oregunner

    Oregunner Well-Known Member

    Joined:
    Aug 15, 2006
    Messages:
    3,335
    Location:
    Oregon
    If you don't have a manual, click on the link above. see page 10. Mark
     
  3. sterlingworth

    sterlingworth Active Member

    Joined:
    Mar 16, 2010
    Messages:
    787
    I have the same press,and a little WD40 works wonders. Nothing special needed.Just a quick spritz to all the linkage and the big center spring. Wipe off the excess and you should be good to go. At least that worked on mine. Good luck...Ray