1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Model 32 Questions

Discussion in 'Uncategorized Threads' started by DANFAM4, Jun 3, 2008.

Thread Status:
Not open for further replies.
  1. DANFAM4

    DANFAM4 TS Member

    Jun 3, 2008
    I have a few questions about the Remington/Krieghoff Model 32.

    1) Will parts interchange between the Krieghoff and Remington Model 32?

    2) Will the forearm iron from a K80 fit a K32?

    3) Whats a fair price for a K32 reciever?
  2. John Thompson

    John Thompson TS Member

    Aug 22, 2007
    Early K 32s had horrid triggers and many had Rem 32 trigger parts installed. With the exception of exact fit they can be fitted. I shot with a man from Findley Ohio at The Grand last year, he had the new High rib K 80 bbl.s fitted to an old Rem. 32 reciever. Note Rem 32 NOT 3200

    Try John Allem in Pa. he might have recievers. $$$$?????
  3. over the hill

    over the hill Active Member

    Aug 30, 2007
    Years ago when the K 80 Unsingle? , High rib? first came out I tried one on my Rem 32. The hindge pins were smaller than the K 80 barrel but the gun closed and I believe the forend would have snapped on except the K80 barrel hanger was different.

    I believe a competent gunsmith could have changed the hindge pins and fit it up to work.

    I also fit a new firing pin I bought from DuPont.

    I suppose early K32s shared some parts but you probably wont get much help from DuPont or Krieghoff. K80 parts are entirely different.

    Del Greco said he could build me an unsingle barrel but I lost interest.

  4. Shooting Coach

    Shooting Coach Well-Known Member

    Sep 14, 2006
    Nashville Tn
    Call Braxton at Krieghoff Intl' for advice.
  5. g7777777

    g7777777 TS Supporters TS Supporters

    Jan 29, 1998
    1. No but can often be fitted - for a price

    2. Yes generally- but do you have a spare forearm or just want to use one forearm with 2 receivers

    3. Too many variables- receiver only? serial number ? condition? upgrades?

    regards from Iowa


    PS- Rem 32s had either large or small hinge pins- the small ones can generally be refit with large krieghoff ones
Thread Status:
Not open for further replies.