1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Model 12 Forearm Adjustment

Discussion in 'Shooting Related Threads' started by dkimbler, May 23, 2009.

Thread Status:
Not open for further replies.
  1. dkimbler

    dkimbler TS Member

    Joined:
    Apr 29, 2008
    Messages:
    95
    My forearm is rubbing my reciever when I pump the gun. I have had a gunsmith
    adjust this and even take a little wood off. It looked good, but after 3 or 4 rounds it started rubbing again. Is the any sure way to cure this problem.
    If anyone knows or knows of someone in Kentucky(I live there), please advise.

    Thanks

    David
     
  2. phirel

    phirel TS Member

    Joined:
    Jan 29, 1998
    Messages:
    9,556
    David- Is there any forward/backward play in the forend when it is locked? There is a nut that requires a spanner wrench at the front of the forend that holds it in place. Sometimes the wood under the nut gets worn.

    Pat Ireland
     
  3. Hap MecTweaks

    Hap MecTweaks Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    9,226
    Location:
    Mesquite, Nevada
    It may be a worn action bar, along with worn receiver hole it goes through also. I'd check that too. Hap
     
Thread Status:
Not open for further replies.