1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Model 12 barrel problem !! Help needed....

Discussion in 'Shooting Related Threads' started by mike holland, Apr 1, 2009.

Thread Status:
Not open for further replies.
  1. mike holland

    mike holland Member

    Joined:
    Jan 29, 1998
    Messages:
    48
    Location:
    Dallas, NC
    I have a md 12 I shoot a lot. The barrel has been getting loose where it screws into the receiver. I have replaced the ring & the threaded adjustment in the receiver. Thanks for any help, Mike in NC
     
  2. Bob Hawkes

    Bob Hawkes Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,915
    Mike, Those adjustments should be made by some one like Wrights. There are different sized components. Good luck, Bob
     
  3. esoxhunter

    esoxhunter Well-Known Member

    Joined:
    Mar 15, 2006
    Messages:
    2,063
    Location:
    Wisconsin
    Mike: I agree; send it to Stu Wright. He is the "Guru" as far as repairing Model 12's. Ed
     
  4. KEYBEAR

    KEYBEAR Active Member

    Joined:
    Jan 29, 1998
    Messages:
    3,222
    If it is still loose it needs more adjustment ? Not sure why you replaced the threaded adjustment ?? The threaded adjustment is not in the reciever .
     
Thread Status:
Not open for further replies.