1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

mod 12 shell lifter wont lift?

Discussion in 'Shooting Related Threads' started by copey, May 21, 2012.

Thread Status:
Not open for further replies.
  1. copey

    copey Member

    Joined:
    Mar 25, 2012
    Messages:
    98
    Location:
    Ont
    The shell lifter for my model12 wont lift when the action is cycled...it will if you push on the lifter It clicks and will move as it should....any ideas what the problem is?
     
  2. Hap MecTweaks

    Hap MecTweaks Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    9,226
    Location:
    Mesquite, Nevada
    Pull the trigger out and look at the back portion of the lifter? There a small pin the bolt rides on to lift the shell plate and it may be the source. The bolt pushes that pin down on the return stroke of the action bar to load a new shell. A place to begin anyway.

    Hap
     
  3. chuckie68

    chuckie68 Active Member

    Joined:
    Jan 13, 2012
    Messages:
    1,839
    Location:
    Royal Oak, Michigan
    Another thing to look at is the lug on the slide bar. Make sure it is still there.

    chuck
     
Thread Status:
Not open for further replies.