1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Mid bead for perazzi

Discussion in 'Want to Buy/Trade Threads' started by Jp2003, Apr 14, 2013.

Thread Status:
Not open for further replies.
  1. Jp2003

    Jp2003 TS Member

    0   0   0

    Joined:
    Jan 31, 2013
    Messages:
    6
    Hi folks anyone know where to buy a kit for installing middle bead on a shotgun
     
  2. Ed Y

    Ed Y TS Supporters TS Supporters

    Rating - 100%
    1   0   0

    Joined:
    Jan 29, 1998
    Messages:
    2,424
    Location:
    Warren New Jersey
    Brownells
     
  3. vdt

    vdt Active Member

    Rating - 100%
    1   0   0

    Joined:
    Jan 29, 1998
    Messages:
    1,978
    Location:
    ontario
    no i have never seen one press in all threaded
     
  4. GunDr

    GunDr Well-Known Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    2,913
    Perazzi mid beads are permenantly pressed in. You will need to drill out the old bead very carefully...stay in the center, then drill to a #45 drill and then tap with a 3-56 tap. You now can install any threaded silver or gold bead.

    If you want a white mid bead, Marbles Gunsight make a press-in bead. You'll still need to drill the #45 hole, but then use a tapered reamer to carefully ream the whole for a proper fit.

    Doug
     
Thread Status:
Not open for further replies.
Search tags for this page
instructions for installing a carlson mid bead
,
bead bump trap
,

center beed for a perazzi

,
mid bead for mx10
,
perazzi mid bead
,

perazzi mid beed for a shot gun

,
perazzi mid beed for a shot gun push in type
,
press in mid bead