1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

mec roller handle

Discussion in 'Shooting Related Threads' started by maclellan1911, Dec 9, 2010.

Thread Status:
Not open for further replies.
  1. maclellan1911

    maclellan1911 TS Member

    Joined:
    Dec 9, 2006
    Messages:
    4,226
    I purchased a roller handle some time ago, I would like another one and also give credit to the maker. I Lost the contact info.

    Its a black steel with a red handle
     
  2. maclellan1911

    maclellan1911 TS Member

    Joined:
    Dec 9, 2006
    Messages:
    4,226
    Mr Brown could you send me a email, my phone message was broken up and I could not get your info clear. I have a friend or 2 that may want your handle set up
     
  3. timberfaller

    timberfaller Well-Known Member

    Joined:
    Feb 24, 2007
    Messages:
    7,977
    Location:
    Eastern Washington
    Hey maclellan,

    Post the infor when you get it. Others are looking for the same handle.

    Thanks
     
  4. E-Z STROKE

    E-Z STROKE TS Member

    Joined:
    Jan 29, 1998
    Messages:
    8
    John

    I sent you the handle for your MEC.I still have your address if you would

    like another one.The price is $30.00 plus actual shipping cost.I also build

    handles for the Spolar and PW

    Thanks Don Brown 765-654-7866
     
  5. leftex

    leftex Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,173
    Location:
    South of Dallas
    How about a picture? I might need one of these.

    Thanks,
    Wayne
     
  6. psfive

    psfive Member

    Joined:
    Aug 9, 2006
    Messages:
    672
    Take my word for it there is nothing better than Don's handle. I have one just may be the best addition to my MEC. I'll try to post a pic a little later if no else has. Thanks Don for a great add on handle. Paul In Nebraska.
     
  7. maclellan1911

    maclellan1911 TS Member

    Joined:
    Dec 9, 2006
    Messages:
    4,226
    <a href="http://s160.photobucket.com/albums/t196/jrm7800/?action=view┬Ąt=100_1823.jpg" target="_blank">[​IMG]</a>

    Here is Mr browns handle, I have switched it over to my Hornady Clasic Press.
    It just happens to fit !!!!!! I had it on my MEC 9000 before.

    Its easy to switch back and forth. theres a lot of room to adjust hieghts and angles of the roller handle.
     
  8. psfive

    psfive Member

    Joined:
    Aug 9, 2006
    Messages:
    672
    Don's Handle on my MEC. Adjustable---yes it is. Can be above or below the operating lever. Then it can be adjusted on two different planes for comfort. It also makes the lever just a bit longer so it takes less down force = less work on my old shoulders. Really it's the BEST. Paul in Nebraska.
     
  9. psfive

    psfive Member

    Joined:
    Aug 9, 2006
    Messages:
    672
    To The Top for Don and one more pass to the bottom. Paul in Nebraska.
     
  10. eyegoods

    eyegoods TS Member

    Joined:
    Jan 14, 2010
    Messages:
    104
Thread Status:
Not open for further replies.
Search tags for this page

mec roller handle

,
roller handle for mec press