1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

MEC Hydraulic Trouble

Discussion in 'Shooting Related Threads' started by coffee, Jan 13, 2012.

Thread Status:
Not open for further replies.
  1. coffee

    coffee Member

    Joined:
    Apr 13, 2007
    Messages:
    86
    Loader locked in the down posisition. Turned nut on collet and still won't release. Not cycling up.

    Thanks Coffee
     
  2. TD1958

    TD1958 Member

    Joined:
    Oct 22, 2006
    Messages:
    596
    You can tap the linkage in the up position with a soft faced hammer or block of wood then lubricate the resizing die abd where it rides against the frame of the loader. This should stop it. Good luck,Tim
     
  3. TOOLMAKER 251

    TOOLMAKER 251 Active Member

    Joined:
    Jan 29, 1998
    Messages:
    3,398
    Spray the collet with WD-40 Rem oil etc. then tap it, it will break free.
     
Thread Status:
Not open for further replies.