1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

MEC Grabber problem

Discussion in 'Uncategorized Threads' started by jdomas, Aug 3, 2008.

Thread Status:
Not open for further replies.
  1. jdomas

    jdomas Member

    Joined:
    Mar 20, 2006
    Messages:
    218
    I was trying to do some reloading and found that I can't pull the lever of my grabber all the way down when there is a shell in station 1 (deprime & resize). I've cleaned it as best I can but need to know how to fully dissassemble the resizer. Any help would be appreciated.

    John D.
     
  2. Big Dave

    Big Dave Member

    Joined:
    Jan 29, 1998
    Messages:
    990
    Here is a link to an owners manual.
     
  3. jdomas

    jdomas Member

    Joined:
    Mar 20, 2006
    Messages:
    218
    I already have the manual, but it does not show how to dissassemble the resizer.
     
  4. trap906

    trap906 Member

    Joined:
    Sep 25, 2007
    Messages:
    252
    it's pretty easy, just take the link off, {the thing that looks like a bicycle chain master link}.. it's pretty simple, self explanatory, once you look at it. anyway, your problem is most likely a piece or 2 of shot caught down in there, you may even be able to just push that shell plate or seat straight up from the bottom, remove it and blow the trash out and re-lube the fingers and all, you can do it, just look at it a minute
     
  5. jdomas

    jdomas Member

    Joined:
    Mar 20, 2006
    Messages:
    218
    Got it. There was a piece of shot petween the sections.

    Thanks!
     
Thread Status:
Not open for further replies.