1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

MEC charge bars for sale progresive 10 bucks each

Discussion in 'For Sale- Members only' started by motordoctor, Feb 28, 2013.

  1. motordoctor

    motordoctor Shoji Tabuchi in Branson

    Rating - 100%
    20   0   0

    Joined:
    Jan 29, 1998
    Messages:
    3,680
    Location:
    ohio
    For sale mec charge bars. They are for a progressive loader and have the number that starts with 500 and 502.

    The only difference is that the 502 bar has a small hole on the side that you can see the bushing number. BUT the bushing turns and you can't see the number anyhow.

    They all take powder bushings. some have the rubber on the top and some do not.
    1 1/8, 1 3/8 11/2, 15/8. 1 3/4 and 1 7/8 ounce bars

    most are new or slightly used. They retail for 22 dollars each.

    10 dollars and $5.50 for shipping each

    Motordoc joe

    [​IMG]
     
  2. motordoctor

    motordoctor Shoji Tabuchi in Branson

    Rating - 100%
    20   0   0

    Joined:
    Jan 29, 1998
    Messages:
    3,680
    Location:
    ohio
    picture shows 11 but I sold a couple
     
  3. motordoctor

    motordoctor Shoji Tabuchi in Branson

    Rating - 100%
    20   0   0

    Joined:
    Jan 29, 1998
    Messages:
    3,680
    Location:
    ohio
    i would sell individual ones one at a time also
     
  4. motordoctor

    motordoctor Shoji Tabuchi in Branson

    Rating - 100%
    20   0   0

    Joined:
    Jan 29, 1998
    Messages:
    3,680
    Location:
    ohio
    10 dollars each plus postage-----usps probably 5.50 each
     
  5. Fowlgunner

    Fowlgunner Member

    0   0   0

    Joined:
    Feb 8, 2006
    Messages:
    170
    Will take the 502 (114) bar if still available.

    Thanks, Will
     
  6. motordoctor

    motordoctor Shoji Tabuchi in Branson

    Rating - 100%
    20   0   0

    Joined:
    Jan 29, 1998
    Messages:
    3,680
    Location:
    ohio
    still have one of each of the following 1 1/8, 1 3/8, 1 1/2, 1 5/8.1 3/4 and 1 7/8 ounce bars. all use bushings for powder. you could place a brass or plastic shim inside the shot hole to get what you want. they are all over one ounce of shot so be careful the way you read itthanks motordoc
     
  7. motordoctor

    motordoctor Shoji Tabuchi in Branson

    Rating - 100%
    20   0   0

    Joined:
    Jan 29, 1998
    Messages:
    3,680
    Location:
    ohio