1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

MEC 900G problem

Discussion in 'Shooting Related Threads' started by Dave P, Sep 17, 2011.

Thread Status:
Not open for further replies.
  1. Dave P

    Dave P TS Supporters TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    2,512
    Location:
    Canton, Il.
    I have a MEC 9000 that I haven't converted to "N" yet. I have a problem with station one the Deprimer/Resizer. Too often the deprimer rod "bottoms Out".

    Is it possible that the deprimer could come loose or get bent? "Sometimes" I can rotate the empty shell and get it to deprime, other times not. Is it possible for the pin to come loose?

    As of yet I have not called MEC. It has quite a bit of mileage on it. Thanks for the anticipated help. Dave
     
  2. Hivoltfl

    Hivoltfl Member

    Joined:
    Jul 8, 2008
    Messages:
    539
    Location:
    north Florida
    I had that problem I found the shell was not dropping down in the collet far enough, once I had some shot holding it up, other time I had to adjust the shell elevator down some. Hope this helps.


    Rick
     
Thread Status:
Not open for further replies.