1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

MEC 9000 reloaders seized up

Discussion in 'Shooting Related Threads' started by TOOLMAKER 251, Mar 21, 2010.

Thread Status:
Not open for further replies.
  1. TOOLMAKER 251

    TOOLMAKER 251 Active Member

    Jan 29, 1998
    Spray the sizing collet with a lubricant like Rem oil WD-40 etc. then take a soft face mallet and tap on the toggle linkage that operates the collet.
  2. acorange

    acorange Well-Known Member

    Sep 13, 2008
    S.E. Iowa
    You can also try to take the toggle link chain apart [take the clip off of the chain swivel and slide out the chain link] at the botton of the collet resizer.
    Most likely what has happened is the collet has siezed up with a piece of shot or something.
    If that does not work unhook the linkage that slides the charge bar back and forth.

    Hope this helps.....
Thread Status:
Not open for further replies.