1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

MEC 600 jr. .410 question

Discussion in 'Shooting Related Threads' started by leftex, Feb 20, 2010.

Thread Status:
Not open for further replies.
  1. leftex

    leftex Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,171
    Location:
    South of Dallas
    Is there any way to put an automatic primer feed on a 600 jr. 410?

    Thanks,
    Wayne
     
  2. skeeljc

    skeeljc Supporting Vendor Supporting Vendor

    Joined:
    Aug 27, 2007
    Messages:
    3,746
    Location:
    Terre Haute Indiana
    No, I do not think so. All of the MEC Sizemasters come with a primer feed except the .410 gauge. The primer seating punch is not big enough to drop a primer through.

    Jim Skeel
     
  3. k3uro

    k3uro Member

    Joined:
    Jan 29, 1998
    Messages:
    463
    Yes,

    They have a primer feed for the Jr. I have a couple laying around that I never use anymore.

    Take care,

    Jim

    sbcoachjim@aol.com
     
  4. leftex

    leftex Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,171
    Location:
    South of Dallas
    Jim

    I was thinking that was the case.

    Coach Jim,

    If you have one that would work on a .410 I would be interested in purchasing it.

    Thanks,

    Wayne
     
  5. Pull & Mark

    Pull & Mark Well-Known Member

    Joined:
    Mar 9, 2006
    Messages:
    5,408
    Wayne, Jim Skeel is correct that they do not make one for the 410. Yes, Mec does make a primer feed for the single stage reloaders both of them, but not in the 410 ga. I just looked at their website and its in there if you just look. You must go to a progressive machine that has the feed differently than the single stage machines. Good Luck and Break-em all. Jeff
     
  6. omahasportingsupply

    omahasportingsupply TS Member

    Joined:
    Jan 7, 2007
    Messages:
    1,138
    Not made for .410 gauge.
     
  7. leftex

    leftex Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,171
    Location:
    South of Dallas
    Thanks everybody, I pretty much knew from the beginning that mec didn't offer one. I thought some creative soul might have come up with some way to make something work.
    Thanks again,
    Wayne
     
Thread Status:
Not open for further replies.