Go into the powder company on-line data bases and do a little research.
Hodgdon has 3 that might work pressure-wise.
The recoil will be the same as the recoil of any other 1 1/8 oz load being pushed at 1100 fps regardless of the peak chamber pressure created by the ignition of the powder.
With your hull, wad and primer: <ul><LI>23.6 gn of SR 7625 powder gives 6100 psi @ 1100 fps<li>20.8 gn of PB that gives 6400 psi at 1100 fps<LI>20.5 gn of 800X gives 6500 psi and 1150 fps</UL>Verify these personally.
There is a relationship between pressure and recoil. If there is no pressure there is no recoil, is there is alot of pressure there is recoil. Sounds like a relationship to me. HMB
I like Green Dot for both the 1oz. and the 1 1/8 oz loads. I shoot mostly the 1 oz. around 1185 fps, and it works excellent. For 7/8oz around 1200 to 1225 fps, I have started to use Alliant's Extra Lite.
sts hulls are tapered more pressure federal hulls are streight walled less pressure I use federal hulls and primmers, 19 grns of green dot, 1oz shot and claybuster 12s0 wads. works very well
International Clays will give you just what you want plus it is very clean burning.
Status
Not open for further replies.
You have insufficient privileges to reply here.
Related Threads
?
?
?
?
?
Trapshooters Forum
4.1M posts
85.3K members
Since 2005
A forum community dedicated to Trap shooting enthusiasts. Come join the discussion about targets, clays, hunting, gunsmithing, gear reviews, accessories, classifieds, and more!