1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Loose rib on a BT99...

Discussion in 'Shooting Related Threads' started by coveybuster, Mar 2, 2013.

Thread Status:
Not open for further replies.
  1. coveybuster

    coveybuster Member

    Joined:
    Dec 15, 2009
    Messages:
    465
    If you have a rattle you don't like, turn the barrel upside down and put a couple drops of blue loctite on the top of the posts.
     
  2. PatMiles

    PatMiles Well-Known Member

    Joined:
    Sep 26, 2011
    Messages:
    2,801
    Turn the gun over and clean out the channel in the rib and the top of the posts with spray carb cleaner. Flush it well. Obviously do not have the forearm or buttstock around the spray. Do not get any carb cleaner on the front bead or mid bead. Use Loctite 271 (red) and dribble several drops around each post. Leave the barrel upside down for a day or two. Not all of the Loctite will set up so clean out the channel with Q-tips. The red Loctite is more permanent than the blue.

    Pat
     
Thread Status:
Not open for further replies.
Search tags for this page

loose browning bt99 rib

,

loose bt-99 rib repair