1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Looking for data for 1 oz loads using e3 powder

Discussion in 'Shooting Related Threads' started by notenoughguns, Feb 27, 2013.

Thread Status:
Not open for further replies.
  1. notenoughguns

    notenoughguns Member

    Joined:
    Dec 3, 2011
    Messages:
    111
    Would like reloading data for 1 once loads using E3 powder , win 209's and either a remmy or federal GM hull . Any help would surly be appreciated !


    DAN (Pa)
     
  2. zzt

    zzt Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,462
    Location:
    SE PA
    STS hull, W209 primer, 17ge e3, TGT-12 wad, 1oz WCM shot. Superb. From Lyman's. 1194fps, 7600psi.
     
  3. notenoughguns

    notenoughguns Member

    Joined:
    Dec 3, 2011
    Messages:
    111
    Thank you zzt , now I need data for federal plastic with win 209 primers and e3 .
    As far as alliant's site , no info for winchester primers with e3 .

    DAN
     
  4. notenoughguns

    notenoughguns Member

    Joined:
    Dec 3, 2011
    Messages:
    111
    Yes , but what powder weight for Federal ?
     
  5. 4th. down

    4th. down Active Member

    Joined:
    Jan 29, 1998
    Messages:
    654
    Fed. hull - 19.5 grs. E3, 12S0 clone, Fed. primer - 1300fps.+-

    Rem. hull - 18.5 grs. E3, TGT-12, Fed. primer - 1300fps.+-

    I use both of the above for excellent loads with 1 oz.
     
Thread Status:
Not open for further replies.