1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Ljutic Ejector

Discussion in 'Shooting Related Threads' started by BobHoukOregon, Jan 12, 2012.

Thread Status:
Not open for further replies.
  1. BobHoukOregon

    BobHoukOregon Member

    Joined:
    Dec 7, 2010
    Messages:
    264
    I have a Ljutic - Hooded Barrel. How do you disable the ejector.
     
  2. Country Squire

    Country Squire TS Member

    Joined:
    Jan 29, 1998
    Messages:
    106
    Bob, Remove the forearm and under the breach towards the muzzle the should be a white metal sear. Towards the top of it there should be 2 allen screws. push up on the sear and tighten the allen screws. that's all there is to it. The ejector sear won't catch in the rod which disables the ejector and allows the shell to just be raised up for removal. Now some of the older models you had to remove the ejector sear which is a little harder ,but not too hard. Some didn't have any screws in the holes,but they are available at the hardware store. I think they are 5/64ths, but not sure. Hope this helps George
     
  3. Dr.Longshot

    Dr.Longshot Banned Banned

    Joined:
    Jan 29, 1998
    Messages:
    5,722
    If they are there they are .050 allen wrench.

    Gary Bryant
    Dr.longshot
     
  4. BobHoukOregon

    BobHoukOregon Member

    Joined:
    Dec 7, 2010
    Messages:
    264
    Thanks, Job done
     
Thread Status:
Not open for further replies.