1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Ljutic choke question?

Discussion in 'Shooting Related Threads' started by smsnyder, Jun 30, 2011.

Thread Status:
Not open for further replies.
  1. smsnyder

    smsnyder Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    4,830
    Bought a Black Diamond Ljutic. Chokes say 710XP and 718XP. What chokes are these? Thanks
     
  2. W.P.T.

    W.P.T. TS Member

    Joined:
    Jan 29, 1998
    Messages:
    8,371
    The one is a 710 XP and the other one is a 718 XP, whats your next question ..? No problem ... WPT ... (YAC) ...
     
  3. Hauxfan

    Hauxfan Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    5,080
    More than likely you have a 0.740 barrel. So your chokes would be 0.030 and a 0.022 choke size.

    With the 0.030 being about a light full, which is really a great choke all the way back.

    Hauxfan!
     
  4. smsnyder

    smsnyder Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    4,830
    Would the 718xp be full?
     
  5. Rastoff

    Rastoff Active Member

    Joined:
    Apr 25, 2009
    Messages:
    1,319
    No, the 710 would be Full and the 718 would be Mod. Those are probably the choke bore diameter. The xp is probably the type. You will have to call Ljutic to be sure.

    For reference mine are marked .705IC and the IC stands for Inverted Cylinder. My chokes are weird. They constrict down to the marked diameter, then open up about .01". So, they look like this:
    LjuticChokeDimensions.jpg
    The image is exaggerated to show the effect.
     
  6. smsnyder

    smsnyder Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    4,830
    Thanks it would have been easier to just print mod or full on the tubes for us slow people. Lol
     
  7. Rastoff

    Rastoff Active Member

    Joined:
    Apr 25, 2009
    Messages:
    1,319
    There is a problem with printing that on the tubes. Not all tubes marked Full, throw a Full pattern. If you really want to know what your chokes are, you must pattern them at the yardage you intend to use them. Then, and only then, can you truly give them a name. Until that time, they are just a constriction.
     
Thread Status:
Not open for further replies.
Search tags for this page

ljutic choke diameter

,

ljutics chokes sizes