1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

KX-5 Forend metal removal

Discussion in 'Shooting Related Threads' started by Sprkee, Nov 22, 2011.

Thread Status:
Not open for further replies.
  1. Sprkee

    Sprkee Member

    Joined:
    Jul 26, 2009
    Messages:
    340
    Location:
    Waterloo,Ontario. Canada
    Can anyone tell me how to remove the forend metal from a KX-5. Thanks
     
  2. Steve Fischer

    Steve Fischer Member

    Joined:
    Oct 2, 2008
    Messages:
    517
    Location:
    Port St. Lucie, Florida
    Sure! Undue the two screws that hold the forend iron to the wood, from the top (inside) of the wood. Push up slightly on the release lever on the bottom (outside of the wood) and pull the whole mechanism off from the rear. Re-assemble in reverse order.
     
  3. Stl Flyn

    Stl Flyn Well-Known Member

    Joined:
    Apr 6, 2010
    Messages:
    8,692
    Steve,

    Doesn't the KX-5 have the push button on the forend release? Those directions sound like the KS-5 forend. Jon
     
  4. Sprkee

    Sprkee Member

    Joined:
    Jul 26, 2009
    Messages:
    340
    Location:
    Waterloo,Ontario. Canada
    Thanks for the help guy`s and you are right Jon the forend has the push button on the end ,and after playing some, I figured it out . Never hurts a ask for help ,much appreciated.
    Brian
     
Thread Status:
Not open for further replies.