1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Krieghoff K series monoblock and 34 inch Rib FS

Discussion in 'For Sale- Members only' started by g7777777, Sep 25, 2012.

Thread Status:
Not open for further replies.
  1. g7777777

    g7777777 TS Supporters TS Supporters

    Rating - 100%
    6   0   0

    Joined:
    Jan 29, 1998
    Messages:
    9,353
    This is as rare as hens teeth and you cant find one at your local five and dime

    Here is a K series monoblock and rib- this one came from a KS5 but I am not sure how much if any difference there is on any of them

    I think he intended on just sliding sub gauge tubes in but dont know for certain

    At one time there were some articles that stated those subgauge tubes were strong enough for target loads alone- but again I am not stating that is true- dont know

    Ok- so you can make your own custom barrel?

    Make your own 20 gauge insert or 28?

    Interesting ideas

    The barrel nub was left- so I think the guy planned on just inserting Briley 20 or 28 or 410 tubes - as the chamber area and the mid hanger are the 12 inch barrel remnants

    There is just less than 7 inches from the back of the barrel hanger to the end of the 12 gauge barrel nub

    I cant find any other parts- just what is shown in the picture so I think you would need the extractor portion also

    Plus what is a replacement block worth?

    No warranty as to anything-

    So should I charge $1077 for this spare monoblock-- mid hanger- rib?

    Or $777?

    Well today I just would like to pass this rare bird along and would take $277 or a 1911 slide and barrel assembly upper- complete if you have one

    Regards from Iowa

    Gene
    gn7777777_2008_0303278.jpg
     
  2. g7777777

    g7777777 TS Supporters TS Supporters

    Rating - 100%
    6   0   0

    Joined:
    Jan 29, 1998
    Messages:
    9,353
    Interesting and multiple uses

    I dont currently have a Kseries single barrel or I might try some of that subgauge shooting trap or let a junior shooter try it

    This could really keep the weight down


    Gene
     
  3. g7777777

    g7777777 TS Supporters TS Supporters

    Rating - 100%
    6   0   0

    Joined:
    Jan 29, 1998
    Messages:
    9,353
    night time
     
  4. bigbore613

    bigbore613 Active Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    4,469
    Gene , I thought I had seen it all.Interesting. Jeff
     
  5. g7777777

    g7777777 TS Supporters TS Supporters

    Rating - 100%
    6   0   0

    Joined:
    Jan 29, 1998
    Messages:
    9,353
    Thanks Jeff- The mono block alone is probably worth $1000 or more

    Gene
     
  6. g7777777

    g7777777 TS Supporters TS Supporters

    Rating - 100%
    6   0   0

    Joined:
    Jan 29, 1998
    Messages:
    9,353
    I hate to say this would be great for a kid or a beginner with subgauge stuff but that seems obvious

    Or if you have damaged a monoblock

    Regards from Iowa

    Gene
     
  7. g7777777

    g7777777 TS Supporters TS Supporters

    Rating - 100%
    6   0   0

    Joined:
    Jan 29, 1998
    Messages:
    9,353
    Tuesday
     
  8. bdenny

    bdenny Member

    Rating - 100%
    2   0   0

    Joined:
    Nov 19, 2010
    Messages:
    433
    Wednesday
     
Thread Status:
Not open for further replies.