1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Kolar Trigger Cleaning and Lube

Discussion in 'Shooting Related Threads' started by rcmbronc, Apr 18, 2013.

Thread Status:
Not open for further replies.
  1. rcmbronc

    rcmbronc Member Supporting Vendor

    Joined:
    Jun 28, 2011
    Messages:
    239
    What is recommended for cleaning and lube if any on a Kolar trigger group.
     
  2. Klay_Buster

    Klay_Buster TS Member

    Joined:
    Jan 29, 1998
    Messages:
    216
    Call Keith at Kolar. He has a nice diagram with notes on lube points.
    I'm sure he would Email it to you.
     
  3. Chango2

    Chango2 Active Member

    Joined:
    Nov 12, 2007
    Messages:
    3,518
    I was told and shown by a reputable 'smith, ex-factory Krieghoff employee: Clean group with mineral spirits. Lube sear/hammer contact area with Krieghoff grease. (This demo at the California State Shoot, 2012.)

    Any grease that will stay at the contact area is fine as long as it is sulphur free. STOS is another good choice.

    I always thought that Krieghoff grease is wrong and too heavy until the 'smith educated me. Works fine now, trigger works slicker and for longer.
     
  4. FRedmon

    FRedmon Active Member

    Joined:
    Feb 25, 2008
    Messages:
    1,687
    I would like the info also...

    FRedmon
     
  5. fuzzy-one

    fuzzy-one TS Member

    Joined:
    Jan 12, 2010
    Messages:
    10
    And another would like info.
     
  6. Beretta687EELL

    Beretta687EELL Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,730
    I have the diagram and instructions from Keith. If you want, I can e-mail it to you. Drop me a note at ... billmalcolm@rogers.com ... Put Kolar trigger in the subject line. Thanks, Bill Malcolm
     
  7. Beretta687EELL

    Beretta687EELL Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,730
    Here is the diagram and notes ... I don't know if you can copy this or not. The actual document is better than what you see here. Bill Malcolm
    beretta687eell_2008_030325.jpg
     
  8. Beretta687EELL

    Beretta687EELL Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,730
    I've replied to all the requests. The e-mailed document works. Bill Malcolm
     
  9. Beretta687EELL

    Beretta687EELL Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,730
    Keith sent me another schematic today, which is the pull only trigger. The one I sent out is for the trigger which has been converted to release, but also has the pull hammers. Bill Malcolm
     
Thread Status:
Not open for further replies.
Search tags for this page
cleaning and lubing match triggers
,

diagram of kolar trigger group

,
how to remove kolar trigger assembly
,
how to remove the trigger group on a kolar
,
kolar grease
,
removing kolar trigger