1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

K80 Hanger Question

Discussion in 'Shooting Related Threads' started by 101voodoo, Aug 8, 2008.

Thread Status:
Not open for further replies.
  1. 101voodoo

    101voodoo TS Member

    Joined:
    Dec 27, 2005
    Messages:
    234
    I've got a K80 32" trap barrel with a #4 Hanger on it.

    I'd like to get both barrels hitting the same POI, and am guessing that I need a #1 to accomplish this?

    Also, if someone can talk me through the process for switching the hangers I'd appreciate it. There used to be a thread that described this, but I can't seem to find it.

    Jim
     
  2. Barrelbulge(Fl)

    Barrelbulge(Fl) Banned User Banned TS Supporters

    Joined:
    Aug 27, 2007
    Messages:
    11,666
    Location:
    West Central Florida
    Go to the Krieghoff site. Click on information,click on K-80, K20 instructional manual. Go to page 10. There's your info. Mike





    www.krieghoff.com
     
  3. hmb

    hmb Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    9,419
    There are two different types of hangers. The first thing to determine is which one your gun uses. Look at the end of the barrel, is it a straight taper or is the last two inches wider. To remove hanger drive the cross pin out with a punch and small hammer. Use a small dowel and hammer to drive the old hanger off the barrel. Install new hanger and replace pin. HMB
     
  4. 101voodoo

    101voodoo TS Member

    Joined:
    Dec 27, 2005
    Messages:
    234
    Thanks - looks like a straight taper.

    Jim
     
Thread Status:
Not open for further replies.