1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

K-80 O/U questions

Discussion in 'Uncategorized Threads' started by g7777777, Sep 14, 2007.

Thread Status:
Not open for further replies.
  1. g7777777

    g7777777 TS Supporters TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    9,353
    look on the backside of the hanger- but regardless of number or no number the poi for the bottom barrel is adjusted with the front barrel hanger mainly and to a smaller degree with the middle barrel hanger

    the middle barrel hanger can itself be adjusted slightly but squeezing it slightly as you tighten it- take it off and look at it and you will see what I mean

    the front hanger however needs to be changed to adjust it

    The top barrel poi wont be affected by either of the above

    regards from Iowa

    Gene
     
  2. Lkn4rocks

    Lkn4rocks TS Member

    Joined:
    May 16, 2007
    Messages:
    259
    *

    brownk80 ..... You said in you first post " Can't seem to get any info from duPont/Kreighoff. "

    Hard to understand how you can not get any info from Kreighoff if you had only gone to their web page and downloaded the instruction manuals that are available there. Just click on the URL above and you will find what you need.

    There are also some Articles that you may want to read while your there, you can also download those files just like the instruction manuals, that is if you have a PDF reader.


    Instruction Manuals .......

    K-80 / K-20 Instruction Manual (File Size 654 KB)

    K-80 Trap Special – Instructions for rib adjustments (File Size 58 KB)

    K-80 Parts Schematic (File Size 284 KB)

    Articles ......

    Krieghoff – What’s involved in rebuilding one? Part-I by Nick Sisley, Skeet Shooting Review, Aug.200 (File Size 15 MB)

    "Having your K-80 or Modell 32 rebuilt- Part II, by Nick Sisley, Skeet Shooting Review, Sep. 2004" (File Size 3.7 MB)

    I hope this is some help.


    .
     
  3. g7777777

    g7777777 TS Supporters TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    9,353
    Shoot it is the only way to tell POI

    the difference in spacing that you describe is the exactly what different front hangers are for- they change the POI of the bottom barrel only

    there is another possibility on your barrels/hangers- they could be K32-- not that it matters as far as POI

    regards

    Gene
     
Thread Status:
Not open for further replies.