1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

K-80 high rib option

Discussion in 'Shooting Related Threads' started by gun fitter, Dec 28, 2011.

Thread Status:
Not open for further replies.
  1. gun fitter

    gun fitter TS Member

    Joined:
    Jan 29, 1998
    Messages:
    2,959
    after charlies stock here's the budget option if you want to shoot a TS Rib with a standard stock Build a comb for it.
    gunfitter_2008_0303_1210.jpg


    Here's a comb jacked up almost all the way.
    gunfitter_2008_0303_1211.jpg

    A paper template for the new comb
    gunfitter_2008_0303_1212.jpg

    Comb block cut and fitted
    gunfitter_2008_0303_1213.jpg

    notice that the holes are offset to allow greater adjustment
    gunfitter_2008_0303_1214.jpg
    shaped and ready for finish
    gunfitter_2008_0303_1215.jpg
    The comb is offset about 1/4 inch to the right slight rollover on comb
    gunfitter_2008_0303_1216.jpg

    gunfitter_2008_0303_1217.jpg

    Shaped and installed Wood only matches in color since this one will be a soft comb covered with leather.

    Joe
     
  2. gun fitter

    gun fitter TS Member

    Joined:
    Jan 29, 1998
    Messages:
    2,959
    ^ Bob i'll be mailing this back tomorrow.
    Joe
     
Thread Status:
Not open for further replies.