1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

just started experiencing pw800b problem help

Discussion in 'Shooting Related Threads' started by kolartarget, Dec 9, 2009.

Thread Status:
Not open for further replies.
  1. kolartarget

    kolartarget Member

    Joined:
    Feb 7, 2009
    Messages:
    79
    I just started having a problem with my loader the pin that knocks out the primer is catching the top of the shell just a little bit but enough to screw up the whole cycling process any thoughts or hints would be appreciated thanks in advance
     
  2. poacherjoe

    poacherjoe Well-Known Member

    Joined:
    Dec 31, 2006
    Messages:
    1,072
    Location:
    Central Kommiefornia
    Give Jim "Whiz" White a call,It is slightly out of time and easy to fix.
     
  3. Doubles Shooter

    Doubles Shooter Member

    Joined:
    Jan 29, 1998
    Messages:
    156
    Location:
    Upstate Western New York
    Check to see if the de-capping pin has unscrewed a few threads. I had that happen to mine.
     
  4. Bob Hawkes

    Bob Hawkes Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,916
    dblsshtr gave you the answer. That has happened on occasion and just a fine line to have it cyclying properly again. Good luck, Bob
     
  5. don q

    don q TS Member

    Joined:
    May 13, 2006
    Messages:
    156
    I happened to me also. I unscrewed it all the way, cleaned up the threads and used a little loc tite, been good since for 3 years. don q
     
  6. kolartarget

    kolartarget Member

    Joined:
    Feb 7, 2009
    Messages:
    79
    the decapping pin is screwed all the way in I think i'll call Jim thanks to all that replied
     
Thread Status:
Not open for further replies.