1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Inertia Lock for Mono Gun

Discussion in 'Shooting Related Threads' started by BobHoukOregon, Dec 5, 2011.

Thread Status:
Not open for further replies.
  1. BobHoukOregon

    BobHoukOregon Member

    Joined:
    Dec 7, 2010
    Messages:
    264
    A while back their was a tread on here about a company that put a trigger like on the inertia lock for Ljutic's. Looking for name of company.
     
  2. Shotgun Specialties

    Shotgun Specialties Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,139
    Hi Bob, we do a I Curve addition to your existing inertia lock for 99.00
    Phillip's Gunsmithing is doing them for me now via mail or at the shoots. I'll try to post pics later

    Phillips # is 1-210-313-5988
    I just sent a bunch today. Thanks, Doug @ SGS
     
  3. luvtrapguns

    luvtrapguns Well-Known Member

    Joined:
    Jun 19, 2009
    Messages:
    1,901
    Location:
    FL
    I saw one on a SS Mono Gun last weekend at the Silver Dollar. Looked pretty good, nice tight fit between the pieces. My only objection was the bolt hole right in the middle of where your finger presses. Sure a lot cheaper than what Ljutic charges for the later style block installed. Marc
     
  4. Shotgun Specialties

    Shotgun Specialties Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,139

    [​IMG]

    Here you go, Doug
     
  5. BobHoukOregon

    BobHoukOregon Member

    Joined:
    Dec 7, 2010
    Messages:
    264
    Thanks Doug, Phillip is a good friend and always does great work.
     
  6. shot410ga

    shot410ga Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    7,794
    Looks like a screw head protruding, rather than a bolt hole. Which is it?
     
  7. Shotgun Specialties

    Shotgun Specialties Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,139

    [​IMG]

    Sorry I don't have a frontal pic, but this shows the recessed center hole for the button head retaining screw and it has 2 pins on both sides that are flush. I got pretty good on them BUT Phillip does a GREAT JOB. Thanks again, Doug @ SGS
     
Thread Status:
Not open for further replies.
Search tags for this page

ljutic curved inertia block