1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

ID THIS RELEASE TRIGGER????

Discussion in 'Shooting Related Threads' started by Bob Schultz, Jul 24, 2012.

Thread Status:
Not open for further replies.
  1. Bob Schultz

    Bob Schultz Well-Known Member Supporting Vendor

    Joined:
    Jan 29, 1998
    Messages:
    2,749
    Location:
    Tuxedo NC
    It does look like a Skeet's to me too. Allen Timney was very good about stamping his name in the release hook.

    Bob
     
  2. Sky Buster

    Sky Buster Sky Buster TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    2,981
    Location:
    Minnesota
    Definetly Skeet's. That's a micrometer stamped on the hook.
     
  3. dcarmorgan

    dcarmorgan Member

    Joined:
    Feb 3, 2012
    Messages:
    276
    Location:
    Bosque Farmes NM 87068
    I thought the micrometer stamped on one side would ID someone...does Skeet's have a web site???? Thanks for all the help.....ANYBODY KNOW WHAT IT'S WORTH OR NEEDS ONE...PERSON I PURCHASED THE 682 FROM PUT IT ON FOR AROUND $325???? THEN HE QUITE SHOOTING AND I'D RATHER HAVE PULL/PULL
     
  4. dcarmorgan

    dcarmorgan Member

    Joined:
    Feb 3, 2012
    Messages:
    276
    Location:
    Bosque Farmes NM 87068
    I Googled Skeet's Gunshop....no luck....anybody got more info on them? Thanks
     
  5. slickhead

    slickhead Active Member

    Joined:
    Jan 29, 1998
    Messages:
    505
    Location:
    West Tenn.
    It is a Skeets and also a very fine man.
     
  6. tv-todd

    tv-todd Member

    Joined:
    Mar 15, 2006
    Messages:
    335
    Skeets gun shop, Tahlequah Oklahoma 918-456-4749
     
  7. dcarmorgan

    dcarmorgan Member

    Joined:
    Feb 3, 2012
    Messages:
    276
    Location:
    Bosque Farmes NM 87068
    tv-todd
    Thanks will try them in the morning...I'm in NM
     
  8. dcarmorgan

    dcarmorgan Member

    Joined:
    Feb 3, 2012
    Messages:
    276
    Location:
    Bosque Farmes NM 87068
    having a problem with it ...the small round pin keeps coming out ( in 1st pic, pointing at it). When pin comes out...set the trigger for release and it fires...not good, tried JB weild held, for about 300 rounds. Needs to go back to gunsmith tobe pressed in or redone.....works great otherwise...pin came out the other day so I just took it off...pull/pull...anybody in need of one?
     
  9. td_ict_ks

    td_ict_ks TS Member

    Joined:
    Jan 29, 1998
    Messages:
    141
    skeet's gun shop. May even be one I did looking at the stamp on it.
     
  10. td_ict_ks

    td_ict_ks TS Member

    Joined:
    Jan 29, 1998
    Messages:
    141
    I didn't do it since that model betetta is after I left. But definitely from skeet's gun shop in tahlequah, ok
     
  11. shotgunpeople

    shotgunpeople Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,787
    Perhaps a tiny spot of TIG weld would cure the problem.
     
  12. J.T.

    J.T. TS Member

    Joined:
    Jun 1, 2012
    Messages:
    16
    I also have 682 gold e trap gun and was thinking about a release for it if you take it out I would be interested in purchasing it.
    Steve Cunico
     
  13. KENENT1

    KENENT1 Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,393
    Location:
    Beloit, WI
    It is a Skeets, I have had a couple, if you put it in another gun, the hammer on the new gun will have to be pinned for the hook to grab...you just can not install the hook and have a release trigger..

    tony
     
  14. Sky Buster

    Sky Buster Sky Buster TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    2,981
    Location:
    Minnesota
    De-grease the pin and the hole in the hammer. Coat both with red Loc-Tite.
    Allow to dry for at least 4 hours. It won't come out unless you heat it
    with a propane torch.
     
  15. dcarmorgan

    dcarmorgan Member

    Joined:
    Feb 3, 2012
    Messages:
    276
    Location:
    Bosque Farmes NM 87068
    Talked to Dean @ Skeets and he is going to take of it....thanks for all th info...lock tite better than JB Weild?????
     
Thread Status:
Not open for further replies.