1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

I need help on .410 recipe

Discussion in 'Shooting Related Threads' started by Sam Ogle, Dec 11, 2010.

Thread Status:
Not open for further replies.
  1. Sam Ogle

    Sam Ogle Member

    Joined:
    Dec 13, 2006
    Messages:
    174
    I've set up a .410 loader (MEC Grabber):
    I am using Remington STS hulls
    Remington SP 410 wads
    Winchester 209 primers
    Alliant 410 powder.

    I can't seem to find an Alliant recipe using the Win 209 primers.
    I don't want to load "hot" loads, just plain old skeet loads.

    Anyone using this combo?

    Thanks;
    Sam Ogle, Lincoln, NE
     
  2. trinketshooter

    trinketshooter TS Member

    Joined:
    Apr 13, 2008
    Messages:
    637
    Try calling Ben at Alliant. He is a very helpful individual. Neil
     
  3. superxjeff

    superxjeff Active Member

    Joined:
    Jan 29, 1998
    Messages:
    3,781
    Drop the powder a grain from the STS primer load and you shoulkd be fine. OR.. Do the smart thing and call Allient. I suspect the info they give you will be pretty close. Post what you find out so we all can learn. Jeff
     
Thread Status:
Not open for further replies.