1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

I need a "trapdude". Where?

Discussion in 'For Sale- Members only' started by JACK, Apr 22, 2011.

Thread Status:
Not open for further replies.
  1. JACK

    JACK Well-Known Member Supporting Vendor

    Rating - 100%
    37   0   0

    Joined:
    Apr 28, 2006
    Messages:
    14,688
    Location:
    NW Wisconsin
    I'm going to try a Trapdude butt pad. Is anyone on the forum a trapdude dealer?

    Jack
     
  2. JACK

    JACK Well-Known Member Supporting Vendor

    Rating - 100%
    37   0   0

    Joined:
    Apr 28, 2006
    Messages:
    14,688
    Location:
    NW Wisconsin
    I need a

    Thanks Steve.

    any recommendations as to type would be helpful too.
     
  3. BDodd

    BDodd TS Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    3,594
    I need a

    MIA, I've tried similar pads that were convex, concave, and flat and always found it depends on the gun for which is right in any case......breakemall
     
  4. Barry C. Roach

    Barry C. Roach Well-Known Member

    Rating - 100%
    1   0   0

    Joined:
    Jan 29, 1998
    Messages:
    9,209
    Location:
    Scottsdale, AZ
    I need a

    MIA. If you want a little more negative pitch buy the "rocker" pad..........Whoops, that's Kick EZ.
     
  5. BAD 303

    BAD 303 Active Member

    Rating - 100%
    8   0   0

    Joined:
    Apr 13, 2006
    Messages:
    3,544
    I need a

    Jack i have one that is like new but was fitted to another gun. Don't remember what it came off of. It is 1 3/4" at the widest point and 5" long. If it will work for you and you want to try it let me know. 10.00 and i will ship it to you.
     
  6. slickhead

    slickhead Active Member

    Rating - 100%
    4   0   0

    Joined:
    Jan 29, 1998
    Messages:
    503
    Location:
    West Tenn.
    I need a

    Rod,s!
     
  7. RED Z06

    RED Z06 Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    121
    Location:
    Los Angeles
    I need a

    MIA,

    Trapdude makes a "rocker" style too. I use the Gooey 1" black trap and I just bought another one that I've yet to mount on a gun. It's a Gooey 3/4" black trap with a large hollow section in the back of it. The hollow section allows for a very soft compression, much more than the standard Gooey rocker.

    These are trap style rockers without the hard top nose some Sporting shooters prefer to prevent snagging on a quick mount.

    I've tried the Kickeze and Gooey pads on the same gun shooting factory handicaps loads and in my opinion, Gooeys are better a reducing recoil.

    Thanks,

    Pat
     
  8. rennerize

    rennerize Active Member

    Rating - 100%
    1   0   0

    Joined:
    Jan 29, 1998
    Messages:
    1,925
    I need a

    MIA, I have them in stock.
    Don
     
Thread Status:
Not open for further replies.