1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
    Dismiss Notice
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

I need a 16 GA Hornady/Pacific/Bair shell holder

Discussion in 'For Sale- Members only' started by omgb, Mar 20, 2011.

Thread Status:
Not open for further replies.
  1. omgb

    omgb Well-Known Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    1,759
    Location:
    Santa Clarita, CA
    I need a 16 gauge shell holder for my 266 press. Any of the 16 ga holders designed for the DL series or later presses will work. Even the bair shell holders are OK. If you have one and want to part with it let me know. If I have to buy the whole dang press maybe we can do that too.
     
  2. omgb

    omgb Well-Known Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    1,759
    Location:
    Santa Clarita, CA
  3. TomB

    TomB Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    109
    Omgb.....I have a set of 16 ga dies and the rotating shell(s) holder for a Bair/Pacific 600/360 that I could let go if you're interested. I'm not familiar with what the 266 was. Tom B
     
Thread Status:
Not open for further replies.