1. We have added the ability for anyone to 'bump' threads that they have created. This is mainly useful in the classifieds area where posters constantly bump for sale threads to bring it to the top. This allows them the ability to do that without having to clutter the thread with extra 'TTT' and 'Bump' type posts. To bump it, go inside your thread and click on 'Thread Tools' at the top, then select 'bump'. You can bump only once per 24 hour period.

    For more detailed information please see this post: Thread Bump Functionality.
  2. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.

Hydro Dipping

Discussion in 'For Sale' started by Rich219, May 30, 2012.

Thread Status:
Not open for further replies.
  1. Rich219

    Rich219 Active Member

    0   0   0

    Joined:
    Aug 25, 2009
    Messages:
    2,079
    I've caught up on our orders for hydro work so we are back to a reasonable lead time of 3-4 weeks. These finishes are about as durable as an automotive finish. I do not recommend apply these finishes to barrels that will be shot rapidly, the excessive heat can cause the film to warp.

    Standard price for a shotgun stock and forearm is $200 + return shipping.

    Pictures of shotgun stock work:

    [​IMG]


    [​IMG]


    Other firearm stuff:


    [​IMG]


    [​IMG]


    [​IMG]


    All prices are quoted on request, aside from shotgun stock sets which as mentioned above are $200 + return shipping.

    All parts are to be disassembled before shipping. If I have to disassemble/reassemble a dis/re-assembly fee may apply.

    Any questions shoot me a PM or an email to rknarr01@yahoo.com. PMs may take a few hours to get to, emails are usually responded to within 2-3 minutes unless I'm sleeping or working in the shop.
  2. cecritz

    cecritz Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    83
    do you have any carbon graphite patterns?
  3. jamie65

    jamie65 Member

    0   0   0

    Joined:
    Aug 21, 2011
    Messages:
    467
    rich , when a stock comes out of the dip tank does it need a clear top coat if so is that part of your process and cost / thanks
  4. Rich219

    Rich219 Active Member

    0   0   0

    Joined:
    Aug 25, 2009
    Messages:
    2,079
    cecritz,

    Yes, I have a roll of carbon fiber on hand.


    jamie65,

    Yes, after it has been dipped in the film and dried I apply a top coat. Flat, semi gloss, or high gloss. The flat or semi-gloss finishes would be my favorites.

    All quoted prices include everything aside from return shipping and a disassembly/reassembly fee if it is needed.
  5. 50 PLUS

    50 PLUS TS Member

    0   0   0

    Joined:
    Jan 10, 2012
    Messages:
    55
    How much to do PFS grip and comb? Do you have a contact number? Thanks Paul in Ohio.
  6. Rich219

    Rich219 Active Member

    0   0   0

    Joined:
    Aug 25, 2009
    Messages:
    2,079
    Paul,

    PM responded to.
  7. Rich219

    Rich219 Active Member

    0   0   0

    Joined:
    Aug 25, 2009
    Messages:
    2,079
    Bump!

    Free return shipping from now until June 7th!
  8. ThomRogers

    ThomRogers TS Member

    0   0   0

    Joined:
    Feb 15, 2012
    Messages:
    55
    Rich where were you didnot see you at Mt. Morris over the weekend
  9. Rich219

    Rich219 Active Member

    0   0   0

    Joined:
    Aug 25, 2009
    Messages:
    2,079
    I don't think I will be shooting much trap this season. I'm in the process of locating an out of state corporate finance job so hopefully I will be able to secure a job and move by some time in Fall.
  10. ThomRogers

    ThomRogers TS Member

    0   0   0

    Joined:
    Feb 15, 2012
    Messages:
    55
    Rich good luck and hope you can keep in touch with everyone
  11. oz

    oz Active Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    1,819
    do you have a catalog?
  12. Rich219

    Rich219 Active Member

    0   0   0

    Joined:
    Aug 25, 2009
    Messages:
    2,079
    oz,

    I don't have a catalog but can send you a link to the website where I purchase my films. You can look at the patterns available and I can special order anything I don't have on hand.
  13. Texshooter

    Texshooter Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    707
    I saw a shotgun done like a snake recently. It was great! AJ
  14. BuddyTrapChamp

    BuddyTrapChamp Member

    0   0   0

    Joined:
    Dec 30, 2010
    Messages:
    250
    Could you do a Carbon Fiber look on a PFS
  15. Mike

    Mike Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    465
    Would you post the link to see the patterns availible please?
  16. Rich219

    Rich219 Active Member

    0   0   0

    Joined:
    Aug 25, 2009
    Messages:
    2,079
    BuddyTrapChamp,

    Yes, a carbon fiber dip can be done to a PFS.


    You will have to cut and paste these links to my film supplier's website. I can special order any of the films on their site for no additional cost.

    Wood Patterns
    http://www.watertransferprinting.com/wg_gallery.html

    Carbon Fiber Patterns
    http://www.watertransferprinting.com/cf_gallery.html
  17. joe kuhn

    joe kuhn Active Member

    0   0   0

    Joined:
    Jan 29, 1998
    Messages:
    3,866
    Been looking for ringtail for the Kuhner for a while. Still nothing.

    The concept.

    [​IMG]


    The gun.

    [​IMG]
  18. Rich219

    Rich219 Active Member

    0   0   0

    Joined:
    Aug 25, 2009
    Messages:
    2,079
    Bump

    The PFS cheek piece and grip section would be $100.
  19. Rich219

    Rich219 Active Member

    0   0   0

    Joined:
    Aug 25, 2009
    Messages:
    2,079
  20. 682LINY

    682LINY Member

    0   0   0

    Joined:
    Aug 14, 2006
    Messages:
    967
    just a heads up,,, the AR upper and lower pictured belong to me ,, very happy with results,, looking forward to haveing another upper done soon,,,Bill from NY
Thread Status:
Not open for further replies.