1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

how to replace MX10rs firing pin?

Discussion in 'Shooting Related Threads' started by shoottilithurts, May 10, 2010.

Thread Status:
Not open for further replies.
  1. shoottilithurts

    shoottilithurts Member

    Joined:
    Jan 29, 1998
    Messages:
    148
    removed trigger assembly, dont know the rest..lol thanks in advance...milt luther 518-608-4243
     
  2. fly

    fly Active Member

    Joined:
    Feb 6, 2007
    Messages:
    1,058
    Location:
    Wisconsin
    remove the stock. There should be a pin that goes across the receiver, near the firing pins. tap lightly with a punch to move the pin out until the firing pin and spring comes out.
     
  3. Ed Y

    Ed Y TS Supporters TS Supporters

    Joined:
    Jan 29, 1998
    Messages:
    2,423
    Location:
    Warren New Jersey
    Press pin out from port side towards starboard but not all the way or you'll have the bolt latch and affiliated parts flying across the room. Just part way and remove your punch. Pins will fall out. If the springs don't come out with them, screw a small wood screw into the hole and pull them out. Clean out the holes good and replace all.

    Ed Yanchok
     
Thread Status:
Not open for further replies.