1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Hey Mike (PerraziBigBore)

Discussion in 'Uncategorized Threads' started by ec90t, Feb 19, 2008.

Thread Status:
Not open for further replies.
  1. ec90t

    ec90t Guest

    Hey Mike,

    I loaded up a few of my special Annie loads and substituted the Versalite for the Fig 8. Man are you right. It softened up the percieved recoil and patterned like crazy. Thanks for the tip!

    ec90t
     
  2. trap41

    trap41 TS Member

    Joined:
    Jun 19, 2007
    Messages:
    206
    share the recipe....
     
  3. ec90t

    ec90t Guest

    Remington hull

    Winchester 209 primer

    28.5 grains Longshot

    Versalite 1 1/8 oz red wad (in place of a Fig 8 wad that I was using)

    1 1/8 oz of 6's

    Runs 1330 fps out of a 30" barrel. Easy on the shoulder and hard on the targets at long range!

    ec90t
     
  4. ec90t

    ec90t Guest

    Mike,

    Where do you find those BP wads at? After what that simple wad change did for my load, I want to try more.

    Those 1 1/4 oz loads would be about perfect for a 45yd hill annie that I shoot at one club. We stand about 45 yards back of the trap house and about 20 ft above it. My 1 1/8 oz shell is getting a little thin on the 3rd and 4th shots.

    ec90t
     
  5. ec90t

    ec90t Guest

    Thanks Mike.

    I will order some tomorrow.

    Do they work best in a straight hull or tapered?

    ec90t
     
  6. ec90t

    ec90t Guest

    That'll work.

    Thanks again Mike!

    ec90t
     
  7. ec90t

    ec90t Guest

    I can't do anything about that, my 870 Comp is a fixed .035.

    ec90t
     
  8. jakearoo

    jakearoo Active Member

    Joined:
    Oct 6, 2006
    Messages:
    1,652
    This is interesting. Please report back. Jake
     
  9. ec90t

    ec90t Guest

    Ok Mike,


    Now that I've spent the last two hours on their website and my mind and thinking have been sent into a new direction. The possibilities are endless and I'm going to be broke!

    I have never studied steel shot shells and their componets until now. This is going to be fun!

    I also found a new wad to try for my sporting clays loads.

    As you are fond of saying, "It's all good"!

    ec90t
     
Thread Status:
Not open for further replies.