1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Help with win 100-308 take down

Discussion in 'Uncategorized Threads' started by vdt, Oct 22, 2007.

Thread Status:
Not open for further replies.
  1. vdt

    vdt Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,981
    Location:
    ontario
    just picked up a Winchester model 100 ,308 would like to remove wood to refinish it ,hold do i seperate wood from frame
     
  2. GunDr

    GunDr Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,913
    The screw that holds the sling swivel on the forend is also the take-down screw.

    Remove this screw (leave swivel attached). Also remove the screw behind the trigger guard. With the screws removed, pull the operating handle all the way back so the bolt is fully open. It is at this point that the whole bbl action, along with the trigger assy, will pivot out of the wood. It will pivot from the back. The bbl will move out first.

    Do not let the bolt slam shut while removing the action, you can scar up or crack the upper lips of the wood's bbl channel.

    Once the bbl action has been removed, the remaining metal block in the rear of the inletting can be removed.

    The trigger assy will be loose and floppy, be careful as not to bend it.


    Doug Braker
     
  3. vdt

    vdt Active Member

    Joined:
    Jan 29, 1998
    Messages:
    1,981
    Location:
    ontario
    THANK YOU .right on...vdt
     
  4. Joe Woods

    Joe Woods Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    1,496
    This gun head a recall. Firing pin!!!!!


    Joe Woods/Ontario
     
  5. GunDr

    GunDr Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,913
    You can call Winchester/Browning, and give them the Ser#. They will tell you if the new pin has been installed.

    Doug
     
Thread Status:
Not open for further replies.