1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Help with TMX,TM1 Fore-end Disassembly

Discussion in 'Shooting Related Threads' started by RunGunIPSC, Jun 28, 2009.

Thread Status:
Not open for further replies.
  1. RunGunIPSC

    RunGunIPSC TS Member

    Joined:
    Nov 3, 2007
    Messages:
    886
    How does the TMX,TM1 fore-end disassemble? Need to clean the old grease out of mine. Did it 20 years ago to another gun,have forgotten. Thanks.
     
  2. Barry

    Barry Member

    Joined:
    Jan 29, 1998
    Messages:
    93
    Location:
    LAS VEGAS
    1st, Look into the latch on the underside of the forearm. Use the forearm button to line up the small hole w/ the screw head and loosen the screw about 1 turn (it's best not to remove the screw as it's very difficult to get back in).

    Next unscrew the "button" at the front of the forearm w/ your fingers and remove.

    Finally, Insert a Perazzi stock wrench in the hole and turn counter clockwise until loose. The forearm iron can now be removed from the wood.
     
  3. whiz white

    whiz white Strong Supporter of Trapshooting Banned

    Joined:
    Jan 29, 1998
    Messages:
    4,771
    Location:
    Rapid City SD
    Here you go... this may help you get the wood off the iron.

    [​IMG]
     
Thread Status:
Not open for further replies.
Search tags for this page
remove forearm iron perazzi tm1
,

tmx fore