1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Help with my PW.

Discussion in 'Shooting Related Threads' started by don q, May 5, 2012.

Thread Status:
Not open for further replies.
  1. don q

    don q TS Member

    Joined:
    May 13, 2006
    Messages:
    156
    I think you are refering to Whiz White of S&W Supply, 605-431-4412. Jim can fix any PW prob. don q
     
  2. Ahab

    Ahab Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    3,650
    I don't have a 950 ... but on a 800 or 900 set the post so that at full stroke it is flush.
     
  3. cubancigar2000

    cubancigar2000 Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    10,521
    Location:
    Idaho
    Do what Ahab says, then play with it. Load a few ( no powder or shot, just a primer) and see if the primer is flush and not making the shell brass concave. If you are inserting it to far it will dish the shell head and you will get light primer strikes. If it is not in far enough it will drag in the loader. What you have done so far is excellent, you are almost there. If you ever need advice feel free to call Whiz. He is an encyclopedia on the PW and is more than will to help. He is a real gentleman
     
Thread Status:
Not open for further replies.