1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Help with micro switch on P-W Shell feeder

Discussion in 'Shooting Related Threads' started by riflegunbuilder, Jul 19, 2012.

Thread Status:
Not open for further replies.
  1. riflegunbuilder

    riflegunbuilder Member

    Joined:
    Jan 31, 2006
    Messages:
    359
    I tried to pick a bad hull out of my hull feed with pliers. The rim of the offending shell caught on the micro switch lever and bent it. I can get the machine to cut off but doesn't want to let hulls drop through the tube or I can get hulls to drop through and the hull feed doesn't cut off reliably.

    Any of you ever adjusted the micro switch or do I just need to replace the switch? How do I remove the switch to replace it?
     
  2. Johnny

    Johnny Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    2,800
    I have adjusted mine. If you replace the switch it will still have to be adjusted.
    Looking down, the switch lever should be centered in drop chute and bent over far enough to let the hulls drop. Hard to say unseen.
     
Thread Status:
Not open for further replies.