1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

help reassembling beretta 391

Discussion in 'Shooting Related Threads' started by mcginty22, Apr 24, 2009.

Thread Status:
Not open for further replies.
  1. mcginty22

    mcginty22 TS Member

    Joined:
    Mar 1, 2008
    Messages:
    19
    need help putting gas cylinder back together, took apart to clean and didn't get back to it for a few days and can't remember how it goes together. i recall that Tron had a thread on cleaning 391 but can't find it. thanks
     
  2. Bill Marsh

    Bill Marsh Guest

    Buy this book. Here is some info, but I bought the entire book and it is really good.

    http://www.shotgunworld.com/bbs/viewtopic.php?f=57&t=101242

    If you can't find it in this link and someone does not answer soon, I'll look it up and get back with you.
     
  3. abiezer

    abiezer Guest

    Just did mine tonight..after about a year or more..
    put the long threaded deal with the half moon shape in first,
    with the half moon shape facing toward the gas ports (small holes in the bbl)
    this half moon piece should fall in a slot to keep at from rotating.
    Next...
    place the larger,washer shaped, cupped piece over the threads of the half moon piece.with the cup facing toward muzzle,
    Next insert the longer, smaller dia washer deal over the same threads.
    Next
    place the spring over the threads(spring sits in the cup shaped piece)
    Next
    screw on the longer knurled/notched nut part on the threads until about 1/8"
    of threads stick above the top of the nut,
    Next,
    screw the thin knurled jam nut on the threads (this should be about flush
    with the end of the male threaded part) lock in place.
    DONE..
     
  4. hmb

    hmb Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    9,417
    Get an 1100. Remember trap shooters are easily confused. HMB
     
  5. mcginty22

    mcginty22 TS Member

    Joined:
    Mar 1, 2008
    Messages:
    19
    went back together like a charm. thanks for help Mcginty
     
Thread Status:
Not open for further replies.