1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

@@@ HELP on K 80 T/S front Sight @@@@

Discussion in 'Uncategorized Threads' started by zoom, Aug 22, 2007.

Thread Status:
Not open for further replies.
  1. zoom

    zoom TS Member

    Joined:
    Dec 25, 2005
    Messages:
    188
    I don't know how to take the front sight bead off of a K-80 Trap Special O/U Barrel. I took the front bead off the un-singel bbl by removing the screw, that was easy. The O/U bbl has no screw and when I twisted it, it just spins. I need help big time.......Thanks

    Bill C
     
  2. zoom

    zoom TS Member

    Joined:
    Dec 25, 2005
    Messages:
    188
  3. zoom

    zoom TS Member

    Joined:
    Dec 25, 2005
    Messages:
    188
    >>>
     
  4. k80bav

    k80bav Member

    Joined:
    Jan 29, 1998
    Messages:
    202
    There is a screw for that sight also. You need a thin screw driver to get to it.
     
  5. zoom

    zoom TS Member

    Joined:
    Dec 25, 2005
    Messages:
    188
    I have looked at the sight bead from all angels and there no screw big or small to be found on the O/U bbl's.
    Thanks Bill C.
     
  6. zoom

    zoom TS Member

    Joined:
    Dec 25, 2005
    Messages:
    188
    >>>>
     
  7. Hooked

    Hooked Member

    Joined:
    Jan 29, 1998
    Messages:
    124
    I believe that you have to remove the rib - the screw for the front sight is accessed from underneath the rib.

    Brian
     
  8. B.C.

    B.C. Member

    Joined:
    Jan 29, 1998
    Messages:
    843
    Hooked is correct ! B.C.
     
  9. trim tab

    trim tab Active Member

    Joined:
    Jul 23, 2007
    Messages:
    1,423
    Location:
    Las vegas
    Hooked is correct. Need to take off rib. Don't loose the little detent bebe the is used under the height adjustment wheel.

    Trim Tab
     
  10. zoom

    zoom TS Member

    Joined:
    Dec 25, 2005
    Messages:
    188
    Got it, you are right. Thanks !! I was trying to put a Hi Viz sight on. Now that I got it off thanks to you guys,I find that the scrws that they send with the sight are too short. Now I guess it's off to the gun smith...more money. Oh well .. again thanks for help.
    All the best
    Bill
     
  11. zoom

    zoom TS Member

    Joined:
    Dec 25, 2005
    Messages:
    188
    Steve ...You have mail.

    Bill C
     
Thread Status:
Not open for further replies.