1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Help! Mauser Bauer 620. Need hammer spring advice

Discussion in 'Off Topic Threads' started by pufftarget, Feb 15, 2012.

Thread Status:
Not open for further replies.
  1. pufftarget

    pufftarget Active Member

    Joined:
    Jan 29, 1998
    Messages:
    453
    The trigger is, I believe, very similar to the Rottweils manufactured by Gamba in the 70' and very much like the trigger shown on the Gamba offered on here the last couple days by Drexel/ Guy Avadesian. If so Paxton arms may have them or there was a Texas gunsmith who made an adaptor to accomodate citori springs.

    Chuck
     
  2. ohiomike

    ohiomike Member

    Joined:
    Jan 29, 1998
    Messages:
    146
    If you don't come up with an exact replacement, there is a good chance you will find what you need to make one easily at Brownell's, or maybe Midway. You might give Brownell's a call with your measurements, or could probably use something from one of these assortments:

    http://www.brownells.com/.aspx/pid=26226/Product/NO-69-COMPRESSION-SERVICE-SPRINGS

    http://www.brownells.com/.aspx/pid=26216/Product/NO-71-COMPRESSION-GUN-SPRINGS
     
Thread Status:
Not open for further replies.