1. Attention: We have put together a thread with tips and a tutorial video to help with using the new software. Please take a moment to check out the thread here: Trapshooters.com Tutorial & Help Video.
    Dismiss Notice

Help ID a Perazzi Stock

Discussion in 'Shooting Related Threads' started by RunGunIPSC, May 25, 2010.

Thread Status:
Not open for further replies.
  1. RunGunIPSC

    RunGunIPSC TS Member

    Joined:
    Nov 3, 2007
    Messages:
    886
    I have a Perazzi stock that fits inletting-wise onto my Grand American Special receiver. Right at the lower rear corners of the stock,the stock is rounded where-as the receiver has squared corners leaving the corners of the receiver exposed. What stock do I have? Can I fill or build up the corners. How would I do this. The stock fits me perfectly & I would like to use it. The top of the comb is shaved slightly so I would not be ruining a good stock. Thanks. Tom
     
  2. twoatloweight

    twoatloweight Member

    Joined:
    Aug 18, 2009
    Messages:
    475
    Sounds like it was made for an MX-3.
     
  3. Steve W

    Steve W Well-Known Member

    Joined:
    Jan 29, 1998
    Messages:
    5,116
    Location:
    Los Angeles
    Stocks from MX-3, MX-3 Special, MX-6, MX-11, MX-14, MX-15 will have the same round radius at bottom corners.
     
Thread Status:
Not open for further replies.